J01 SPRINKLER SOCKET is Olets with female NPT thread that uses for low-pressure This will reduce the use of one socket and one coupling.

Material of Construction:
Ductile Iron as per ASTM A536 Grade 65-45-12

Pressure Rating:
Test Pressure: 12.5 MPa
Maximum Working Pressure: 2.5 MPa

As per FM 1920:2007, sizes ≤ 150 mm are rated PN20, while sizes > 150 mm are rated PN16.

Nuts & Bolts: Heat Treated Carbon Steel as per ISO 898-1 Class 8.8

Finishing: Epoxy Red Paint RAL 3000 / 3001

Size: 65mm – 250mm

Product Specification Range: DN25 – DN600

Design Standards: ASTM F1548, ASTM F1476, or GB5135.11

Size Range: 65mm – 150mm

Spraying Process: Dip Coating, Powder Coating, Electrophoresis, Galvanizing

Sizes Available: 62 x 50 mm – 300 x 200 mm

Working Pressure: Up to 20 Bar / 300 PSI

Maximum working pressures are based on CWP (Cold Water Pressure) or the maximum allowable working pressure within the service temperature range of the gasket used in the coupling. Ratings are based on standard wall or Schedule 7/10/40 steel pipe, cut or roll-grooved to ANSI/AWWA C606-04 specifications. Actual ratings may vary from UL, ULC, or FM approved ratings depending on testing conditions and pipe specifications.

Coating: Red Enamel

Material: Cast Ductile Iron

Sizes Available: 65 mm – 300 mm

Working Pressure: Up to 20 Bar / 300 PSI

Maximum working pressures are based on CWP (Cold Water Pressure) or the maximum allowable working pressure within the service temperature range of the gasket used in the coupling. Ratings are based on standard wall or Schedule 7/10/40 steel pipe, cut or roll-grooved to ANSI/AWWA C606-04 specifications. Actual ratings may vary from UL, ULC, or FM approved ratings depending on testing conditions and pipe specifications.

Pipe Coating: Red Enamel

Pipe Material: Cast Ductile Iron

Sizes Available: 65 mm – 300 mm

Working Pressure: Up to 20 Bar / 300 PSI

Maximum working pressures are based on CWP (Cold Water Pressure) or the maximum allowable working pressure within the service temperature range of the gasket used in the coupling. Ratings are based on standard wall or Schedule 7/10/40 steel pipe, cut or roll-grooved to ANSI/AWWA C606-04 specifications. Actual ratings may vary from UL, ULC, or FM approved ratings depending on testing conditions and pipe specifications.

Pipe Coating: Red Enamel

Pipe Material: Cast Ductile Iron

Sizes Available:
65 x 25 mm – 200 x 100 mm

Working Pressure:
Up to 16 Bar / 230 PSI

Maximum working pressures are based on CWP (Cold Water Pressure) or the maximum allowable working pressure within the service temperature range of the gasket used in the coupling. Ratings are based on standard wall or Schedule 7/10/40 steel pipe, cut or roll-grooved to ANSI/AWWA C606-04 specifications. Actual ratings may vary from UL, ULC, or FM approved ratings depending on testing conditions and pipe specifications.

Coating: Red Enamel

Material: Ductile Iron conforming to ASTM A536 Grade 65-45-12

Sizes Available:
65 x 32 mm – 300 x 250 mm

Working Pressure:
Up to 20 Bar / 300 PSI

Maximum working pressures are based on CWP (Cold Water Pressure) or the maximum allowable working pressure within the service temperature range of the gasket used in the coupling. Ratings are based on standard wall or Schedule 7/10/40 steel pipe, cut or roll-grooved to ANSI/AWWA C606-04 specifications. Actual ratings may vary from UL, ULC, or FM approved ratings depending on testing conditions and pipe specifications.

Pipe Coating: Red Enamel

Pipe Material: Cast Ductile Iron

Standard: ANSI / UL 213C

Size: 50 x 25 mm – 200 x 50 mm

Material: Ductile Iron ASTM A536, 65-45-12

Branch: Female Thread, NPT / BSPT

Temperature: -30°C to 300°C

Working Pressure: 300 PSI (2.07 MPa)

Surface: Red Paint / Hot-Dip Galvanized